Prepare natural nail
1. Apply with light massage on your hands and the hands of your clients antiseptic.
2. dry manicure (without water or deduction eponychion) and give shape to the free end of the natural nail.
3. Always file very slightly the plate of the nail with 100/180 file to remove the greasy surface and to improve adhesion. Clean and Dehydrate the nail plate using Nail Degreaser on a piece of paper cellulose.
Application of the product – K-Polish Shield
1. Apply an extremely thin layer of Base Coat nails and five fingers. Make sure sealing well their free ends and the Cure in UV lamp for 60-90 sec led 30 sec
2. Apply a very thin coat of paint, K-polish Shield seem almost transparent. Polymerizing 2 min 30 sec Led. Apply a second thin layer of paint which will achieve full coverage and polymerized for another 2 min 30 sec led
3. Apply a thin layer k-Polish Top Coat sealing the free ends. Polymerized for 2 min 30 sec led. Remove sticky layer with Cleaner using cellulose papers.
4. Soak eponychia gently massage ladaki.
Application of the product – k- Polish Shield French
1. Apply an extremely thin layer of Base Coat nails and five fingers. Make sure sealing well their free ends and the Cure in UV lamp for 60-90 sec 30 sec led
2. Shake the k-Polish Pro Pink Cashmere or Pale Pink Snow Angel or before use. Apply a very thin layer and polymerizing 2 min. Apply a second thin coat and cured for another 2 min. Shake the Polish Pro Blanka well before use. Take the brush from the bottle and wipe the back of the rim of the bottle to remove the superfluous quantity. The spread on the nail to create the smile. Polymerized for 2 min.
3. Apply a thin layer of Polish Pro Top Coat sealing the free ends. Polymerized for 2 min. Remove sticky layer with Cleaner using cellulose papers.
4. Soak eponychia gently massage ladaki.
Deduction
There are two easy removal methods touK- Polish Shield. It is not necessary filing before its removal, but if you do then speed up the process because the crush gyalistiki layer.
1. Place your fingertips in a bowl with Acetone. You can add a little oil in Acetone to prevent skin dehydration. The K-Polish Shield will be peeled in 10 minutes.
OR
1. Take a piece of paper cellulose soaked in Acetone and touch up the nails with the Polish Pro and wrap each finger separately with a piece of aluminum foil.
2. Acetone readily removes the product in 10 minutes. Easily scrape that remains there with a stick.
3. The nail is now ready for the next K-Polish Shield Color.
Instructions Wonder Gelacq
1. Start with a mini manicure (dry).
2. With a Buffer remove the sheen from the natural nail.
3. Dehydrate nails with Nail Degreaser.
4. Apply a very thin Wonder Gelacq coat of paint over the natural nail and direct repeat a second coat fuller as they would vafate with a classic varnish .Prosochi! Seal the free end. a 2 ‘to UV or 30 “LED-lamp. (In the case of the French after this step, apply the white line).
5. to remove sticky residue with cleanser.
6. Apply the cuticle little ladaki for hydration and more shine!
NOTES
If the nails are soft or brittle use Dual Coat Base & Top has excellent adhesive property. Apply a very thin layer and Cure a 2 ‘to UV or 20 “LED-lamp.
If you want the color and the gloss lasts ca more days lay Dual Coat Base & Top and seal the free end. a 2 ‘to UV or 30 “LED-lamp.
In the case of French white line never goes directly to the physical or on Dual Coat Base & Top but only on color. And the polishing layer is necessary otherwise it will be uneven surface because of that line.
If you plan, you will be on the fresh coat of paint with drops of other colors Wonder Gelacq, or polymerized color with various decorative or Nail Art Pen and then necessarily the Dual Coat Base & Top.
FREQUENT PROBLEMS
Blisters on the color of the nail! Causes: trapped air bubbles in the bottle or in your brush. Solutions: Be careful how you shake the bottle, which drain the brush in its mouth and the way you apply the product. He does not want rapid and repetitive movements. With a light touch slow Pave before polymerize.
Waves and wrinkles as skin! Causes: a) residues of grease to the natural nail b) shake the color c) The paint layer became thick d) did not seal properly at the edges, e) not polymerized at the right time or the lamps want change. First look of your lamps.
Avulsion usually after 2-3 days. Causes: a) residues of grease to the natural nail b) thick layer of the Base (if used), c) does not shake color, s) The paint layer became thick, e) There Sealing right edges, f) There was polymerized in the right time or the light bulbs they want change. First look of your lamps.
PROCEDURE KONAD STAMPING
Apply the polish to the desired pattern. Scrape with a special razor. Click with the special stamp, and drag the nail. Cover with Top-coat.Gia more information check the following link on You tube http://www.youtube.com/watch?v=nHUSK-Te3zo
Foile PROCEDURE
Apply the special glue with brush. After a short time the glue becomes transparent. Apply Foile the good side up stick and pull quickly.
For more information check the following link on You tube http://www.youtube.com/watch?v=rdFPyNAkQq0